iHobby RC Plane Ready to Fly, 2.4Ghz 2 Channel RC Aircraft Built in 3-Axis Gyroscope
This is 2 channels remote control airplane suitable for toys level and beginner, not suitable for hobby level and expert.
CAUTION: 1.RC plane is intended for new pilots, please be very careful on how you handle this plane, please follow instructions carefully and do NOT fly in high altitude until you got proper practice, or you will crash and damage your plane. 2.This RC model is not a toy and is not suitable for children under 14 years old, keep it away from children. 3.Carefully read the instruction before any use, if you are a beginner, it's advisable to be assisted by an experienced adult. 4. Please get in contacting to get replacement propellers and landing gear incase of need.
ASSEMBLE RC GLIDER
Insert the wing to RC plane's body
Tighten the screw
Fix front landing gear
Fix rear landing gear
FUN TO FLY RC PLANE
Binding between plane and remote control
1. Switch the remote control, then switch the rc plane. Take the plane on ground horizontal.
2. Quickly push up the left stick (as red arrow), pullback it to bottom (as yellow arrow),after that leave it to central position as origin.
3. Bundling is completed when the red led stop flashing.
4. You get ready to flying remote control airplane now.
Correction take off
Two methods of taking off ( hand throwing off or sliding off ) brings amazing flight route for pilot. 2 channels remote control system makes a simple flight practice. This remote control airplane is a good training tool for beginners who want to pilot hobby level rc plane
RC Plane head to wind
We recommend to head to wind for taking off in order to fly our rc aircraft easy. Meanwhile, if the outside wind is more than class 3, it is not suitable for playing remote control airplane anymore.
REMOTE CONTROL
Install battery to rc plane
Connecting Lipo battery with rc plane on bottom, then put it into battery box.
Remote control
1.Left stick :
Responds to taking off & landing
2.Right stick:
Responds to left & right turn
Trim button
Trim button uses to adjustment of Straight flight.
1.Continue to press left trim button if rc plane always flies to right.
2.Continue to press right trim button if rc plane always flies to left.
What is iHobby RC plane
Description:
Model : 2 CH RC Airplane building 3-Axis Gyro Material : EPP styrofoam Wingspans : 415mm Fuselage : 395mm
Specification:
Flight Time : 15 minutes Charging Time : about 30min Remote Control : 2.4G 2CH Remote Control Range : 250(ft) Motor : Coreless motor Battery : 3.7V Lipo Rechargeable Charger : 1S USB charger
Caution for Lipo battery:
Don't over-charge, or over-discharge batteries. Don't put it beside the high temperature condition. Don't throw it into fire. Don't throw it into water.